Starship Corporation
http://www.starshipcorporation.com/forum/

added Cooling to the new Grid-System
http://www.starshipcorporation.com/forum/viewtopic.php?f=18&t=3861
Page 1 of 1

Author:  Ratakari [ Wed 27. Feb 2013, 23:31 ]
Post subject:  added Cooling to the new Grid-System

after a lot of work testing and tweaking the power grid system (and adding a new menu to switch between power, cooling, fuel and air), I finally added cooling again.
fuel and air are soon to follow.

Attachments:
grid1.jpg
grid1.jpg [ 586.78 KiB | Viewed 12075 times ]
grid2.jpg
grid2.jpg [ 555.12 KiB | Viewed 12075 times ]

Author:  Aestuo [ Thu 28. Feb 2013, 06:12 ]
Post subject:  Re: added Cooling to the new Grid-System

cool beans! this should make managing the two most important grids easier XD

Author:  elStrages [ Thu 28. Feb 2013, 07:10 ]
Post subject:  Re: added Cooling to the new Grid-System

Sweet :)

Can get get sweet tunnels. A tunnel that pumps sweets to every room to boost moral :D
Can come from the sweet manufacturing room. Need 50 power and 20 cooling :D

Author:  Ratakari [ Thu 28. Feb 2013, 11:50 ]
Post subject:  Re: added Cooling to the new Grid-System

:lol: thats for the "Captain Wonka" mission

Author:  Trifler [ Sun 3. Mar 2013, 09:50 ]
Post subject:  Re: added Cooling to the new Grid-System

Could the connection between decks be changed to handle everything (Power, Cooling, Air)?

Author:  Ratakari [ Sun 3. Mar 2013, 11:41 ]
Post subject:  Re: added Cooling to the new Grid-System

yes, I am thinking about that.
however, as the connection rooms are making the most trouble at the moment, I will not include them in the next build. I think its more important to move forward with crew managment.

Author:  devanmedrow [ Mon 11. Mar 2013, 17:55 ]
Post subject:  Re: added Cooling to the new Grid-System

I would love to see the option to move the room power point. if it has to stay in the corner Ok, but at least let us set witch corner it is in. This would make us able to keep the power grid as close to the core of the ship as possible. I do not know haw much extra coding it would take (hopefully not a lot). If it would be to much then this system works Ok.

Author:  Aestuo [ Tue 12. Mar 2013, 01:15 ]
Post subject:  Re: added Cooling to the new Grid-System

Ratakari wrote:
yes, I am thinking about that.
however, as the connection rooms are making the most trouble at the moment, I will not include them in the next build. I think its more important to move forward with crew managment.


i agree, polishing off and improvement should be left for later, maybe even beta, right now i think getting crew management up and running is something i personally would rather see come next.

devanmedrow wrote:
I would love to see the option to move the room power point. if it has to stay in the corner Ok, but at least let us set witch corner it is in. This would make us able to keep the power grid as close to the core of the ship as possible. I do not know haw much extra coding it would take (hopefully not a lot). If it would be to much then this system works Ok.


+1 this, i too find it annoying that, by no decision of my own, some room connection points end up on the outter most part of my ship while those on the opposing side are much closer to the core, i don't really know how it could be implimented but doing so would make design much cheaper in termes of reduced power/cooling.air lines cost, money that would probably be better spent on shielding XD

Page 1 of 1 All times are UTC [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/