I met two error with the same design today, I wonder if they are linked?
(Error 1) I built a ship on the 5 deck hull and I have an elevator (Lift 1) going from deck 4 to 5 (the top deck is 5 for this text) and another one (Lift 2) going all the way from deck 1 to 4. I exported the ship, all is fine and doing well and I tried it and then wanted to change the design. When loading the design it tells me there is an error with an unknown room.
(Error 2) Then I tried another crew management mission with the ship, and at some point I run in the error that a lift is wrong somewhere. I noticed that while preparing my TEC patrols, one of them was saying it would use Lift 1 in its patrol design (the red line) to go down from Deck 4 to 3 and Lift 2 to come back up.
Could there be a link between the 2 error and a bug with lifts where they try to use one to go down though it does not? Thus saying there is an unknown lift and a wrong room placement?
Following is the error code and my ship design.
Error 1 :
Code:
___________________________________________
ERROR in
action number 1
of Collision Event with object obj_mark_links_oben
for object obj_mark_links_unten:
Error in code at line 3:
if other.master.room_type = t_corr
^
at position 21: Unknown variable room_type
Error 2:
Code:
___________________________________________
ERROR in
action number 1
of Step Event
for object obj_unit:
In script activate_lift:
Error in code at line 18:
if aktueller_raum.stairway = false
^
at position 27: Unknown variable stairway